In this section painted mini figurines from one of my favourite TV-shows futurama are shown.
3D models of figures created by Rober Rollin and accessed through myMiniFactory
Creation process:
3D printing with HIPS, 0.25 layer height, cleaning, sanding and then painting with acrylics. In some of the figurines minor after painting glazing techniques were used.
Why HIPS:
Hips is a great material for printing 3D figurines because it is easily sanded and then can be painted without priming with plain acrylic paints
Pros:
Quick and easy printing, minor per-processing before printing. Average to good results.
Cons:
FDM 3D printers cannot deliver great printing quality due to the fact that in any resolution small layers will still show. If you wish to achieve top quality probably a resin printer is a better solution. I own one of those and I will try to share some results in the future.
Painted figures
Philip J. Fry from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Philip J. Fry from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Philip J. Fry from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Turanga Leela from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Turanga Leela from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Turanga Leela from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Nibbler from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Nibbler from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Nibbler from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Fry, Leela and Nibbler
Amy Wong from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Amy Wong from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Amy Wong from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Kif Kroker from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Kif Kroker from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Kif Kroker from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Zapp Brannigan from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Zapp Brannigan from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Zapp Brannigan from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Dr. John A. Zoidberg from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Dr. John A. Zoidberg from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Dr. John A. Zoidberg from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Bender
Printed in PLA, 0.25 layer size, Zonestar P802N, Model by Eugenio Fructuoso Orenes retrieved by MyMiniFactory
Bender
Printed in PLA, 0.25 layer size, Zonestar P802N, Model by Eugenio Fructuoso Orenes retrieved by MyMiniFactory
Bender
Printed in PLA, 0.25 layer size, Zonestar P802N, Model by Eugenio Fructuoso Orenes retrieved by MyMiniFactory
Hermes Conrad from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Hermes Conrad from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Hermes Conrad from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Calculon
Calculon from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Calculon from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Calculon from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Scruffy from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Scruffy from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Scruffy from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Lrrr from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Lrrr from futurama
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Latest updates
Mom
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Mom
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Mom
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Slurm Mackenzee
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Slurm Mackenzee
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory
Slurm Mackenzee
3D printed figure using HIPS filament at 0.25mm layer height, hand painted using acrylics. 3D models of figures created by Rober Rollin and accessed through myMiniFactory